Access Point Aruba [R7J49A] AP-615

Interface

RJ-45 :Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX, 2.5Gbps speed complies with NBase-T and 802.3bz specifications, POE-PD: 48Vdc (nominal) 802.3af/at POE (class 3 or higher), 802.3az Energy Efficient Ethernet (EEE)
DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
USB 2.0 host interface (Type A connector) Capable of sourcing up to 1A / 5W to an attached device
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio

Wi-Fi Radio Specifications

Dual-radio, 2.4GHz and 5GHz (dual concurrent) 802.11ax 2×2 MIMO

Wi-Fi Antennas

 Integrated downtilt omni-directional antennas for 2×2 MIMO with peak antenna gain of 2.8dBi in 2.4GHz, 4.5dBi in 5GHz and 4.5dBi in 6GHz

Dimension

160mm (W) x 160mm (D) x 39mm (H) (without mount bracket)

Weight

520g

Power sources and consumption

Maximum (worst-case) power consumption (without / with a USB device attached):
DC powered: 12.5W/18.2W
POE powered: 14.7W/20.9W
This assumes that up to 5W is supplied to the attached USB device

Maximum (worst-case) power consumption in idle mode: 5.6W/11.0W (DC) or 6.9W/12.9W (POE)

Mounting

A mounting bracket has been pre-installed on the back of the AP.

Warranty

Aruba’s hardware limited lifetime warranty